Pro'sKit MT-7058 Manuel d'utilisateur télécharger pdf

ACCESSORIES

MINI LAN CABLE TESTER

MT-7058

User’s manual

INTRODUCTION

The mini LAN cable tester complies with CE

safety standard, compact size and lightweight

design for easy detection of good connections,

opens, crossed wires & split pairs by only one

touch testing. Traces wires with tone. Remote

lights allow one person operation. Additional

non-contact voltage detection provides user

safety. Ideal for testing installed cables or

patch cords with RJ-45, RJ-11, RJ12 and

BNC connectors.

SAFETY RULES& WARNINGS

Read all instruction in this manual before

using this tester. Failure to do so may result

in damage to the tester or injury to the user.

2. Do not use this tester with its case open, or

with parts removed. Doing so may damage

the tester and/or injure the user.

3. When using this tester in schools and

workshops, responsible teachers or skilled

personnel must control the usage of this

tester. Failure to observe this precaution

may result in damage to the tester or injury

to the user.

4. Follow the recommendations of any Trade

Organizations or Regulatory Agencies

whose scope encompasses the use of this

tester failure to do so may result in damage

to the tester or injury to the user.

5. Repairs and maintenance must only be

carried out by qualified service personnel or

qualified electricians/technicians who know

the dangers of.

6. Do not apply voltage or current to any of the

tester’s connectors. Doing so may damage

the tester and /or injury the user.

7. Remove the battery when the tester not in

use for longer than a month. Chemical

leakage from the battery could damage the

tester.

PRODUCT FEATURES

1. Complies with CE safety standard

2. Automatically detect good connections,

opens, crossed wires & split pairs

3. Simple one button test

4. LEDs indicate connections and faults

5. Tests shielded (STP)or unshielded(UTP)

LAN cables

6. BNC cable indicator

7. Non-contact voltage detection for user

safety.

8. Long cable test more than 300 meters

9. Low power consumption with auto power

off function to preserve battery.

SPECIFICATIONS

1. Cables Tested: UTP and STP LAN cables

Terminated in RJ-45 male connectors. (EIA/

TIA 568)RJ-11, RJ-12 cables with male

connectors, 2 to 6 connectors installed.

BNC cables with male connectors.

2. Faults Indicated: No Connection, Short,

Straight, and Crossover.

3. Low Battery Indicator: LED lights different

colors to indicate low battery

4. NCV detection for AC60V~240V 60Hz

5. Case Dimens ions:100*60*24.5mm(LxWxH)

6. Weight:120g (without battery)

7. Battery: 12V battery. AE23

PRODUCT DESCRIPTION

1. BNC connector

2. Non-contact voltage

indicator

3. Power/sound on/off switch

4. RJ-45/RJ-11/12 connector

5. Auto / manual NCV switch

6. One touch push button

7. RJ-45/RJ-11/12 connector

 Female

BNC Terminator

 Instruction Manual

 Pouch Bag

OPERATION

1. The MAIN and REMOTE unit:

The Mini LAN Cable Tester consists of a

main unit and a remote unit. The remote

unit stores conveniently on the bottom of

the main unit. It can be removed or

replaced by sliding it from left to right or

right to left respectively.

2. Performing the test:

Once the remote and main units are

attached to the ends of the subject cable,

as described in 3.2 and 3.3, testing may

begin, simply press and release the test

button on the main unit, observe the LED

indicators, and note the beeping sound that

comes from the main unit.

3. Interpreting the results:

3.1 Power LED:

The power LED should lights up

whenever the test button is pressed and

released. If the power LED turns red,

replace the battery. The power LED

also indicate the test result, it will turn

red, except wire in “Straight” condition

will turn green

3.2 No connection LED

If the remote is not connected to the

main unit with a cable, or the cable has

no intake conductors, the no connection

LED will light up and the beeper will

sound for 4 times.

3.3 Straight/Crossover LED

When all of the appropriate numbered

LEDs light up, the straight or

crossover

LED also lights up, and the beeper

sounds for 4 times (8P8C 3 times), it

means the cable is all correct connection. If

some of the LEDs do not light up, but

others light up, and the straight LED also

lights up, it means the cable is open.

If some of the LEDs light up inconsistently,

and the straight LED also lights up, it

means the cable may be misconnected.

Please check in turn of lighted LED of

remote unit to identify which wires are

misconnected or change left side switch to

“Step” become manual function to check

the misconnection status step by step.

Note:

RJ-1

1/12 cables may have 2 conductors, 4

conductors, or 6 conductors. When testing 2

conductor cables, LED 4 ~ 5 must light up, for

4 conductor cables, LED 3~ 6 must light up

and for 6 conductor cables, LED 2~7 must

light up, and “STRAIGHT” LED also lights up.

The numbered LEDs do not indicate a good

connection exists; only shows connection

exists. If “Short” LED lights up during test, it

means the shorted was found in the cable.

.4 Short LED

If 3 & 4 LEDs lights up, and all other

LEDs do not light up, the cable is

shorted; the “short” LED will light up.

3.5 Crossover LED

Numbered 1~8 LEDs will light up, and

“Crossover” LED also lights up. Means

wiring one end with 568-A standard,

and the other end with 568-B standard

4. BNC testing:

Numbered LEDs will light up during

scanning, after scanning, both LEDs of

BNC on the main unit and the BNC receiver

will light up. If the BNC cable is short, only

the LED of BNC on the main unit lights up;

if the BNC cable is open, both LEDs of BNC

on the main unit and the receiver won’t light

and “no connection” LED will light up..

Non-contact Voltage Detection:

Set the left side switch to the NCV position

and the right side switch to the Sound On

position. As the antenna is located at the

right top of the tester, close right top of the

tester to the live wires, the LEDs of NCV

will flash with sound.

Pleas

e put the tester as close as

possible to surface of tested

source for optima testing result.

1 2

Résumé du contenu

Page 1 - User’s manual

ACCESSORIES MINI LAN CABLE TESTER MT-7058 User’s manual INTRODUCTION The mini LAN cable tester complies with CE safety standard, compact size

Page 2 - MT-7058

插入BNC測試座, 按下測試鍵, 掃描後若電纜線導通狀態, 則“BNC＂指示燈亮。若電纜線開路, 則“NO CONNECTION＂指示燈亮. “BNC＂指示燈不亮如果 6 芯電話線則 LED 亮“2-7＂，4芯電話線亮“3-6＂，2 芯電話線“4-5＂，同時“STRAIGHT＂燈也亮。

Commentaires sur ces manuels

Pas de commentaire

Pro'sKit MT-7058 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Testeurs de réseaux câblés Pro'sKit MT-7058. Pro'sKit MT-7058 cable network tester Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels